Sim Card Removal Tool Not Working
Sim Card Removal Tool Not Working. Turn off your phone and find the small hole for the sim card tray. If you have trouble to enter code and/or if code is not accepted on your phone then please try to make “factory reset” following the instructions below :
Third, dial the number 911 or 112 and disconnect the call once connected. Tap text messages > manage sim card messages. Push firmly but gently until the tray pops out.
Get It As Soon As Wed, Jan 12.
Clean the sim card with a soft cloth, reposition it and close the drawer. It may sound amusing, but it does bypass the sim card not supported on iphone. For iphone x, press and hold the power/lock and volume down keys until you see the slide to power off screen.
Tap The 3 Dots Icon.
Insert the removal tool into the hole in the sim card slot on the side of your phone, then slide the tray out. ← back to model page. When the sim card is not detected, remove it from the computer.
Push Firmly But Gently Until The Tray Pops Out.
A piece of the paper clip is stuck in the hole and is causing blockage. This sim tool guarantees the efficient removal of the sim from the tray. Would not go., then i used a paper clip and it broke off.
As We Explained To You In The First Part Of This Guide, Be Sure That The Sim Card Is In Good Condition, Check That It Is Positioned In The Right Slot And In The Right Direction.
Have tried everything suggested and same. Third, dial the number 911 or 112 and disconnect the call once connected. Clean the sim slot and the flex pin connector.
Check/Replace The Resistor If Damaged.
When you face the issue of “sim card not detected”, clearing out cache data could prove an effective solution. Lift card from the tray. Use only the sim tray that came with your device.
Post a Comment for "Sim Card Removal Tool Not Working"